Mushroom stone (yellow) SD3820 Essential information Use method (for example) (1) according to the size of the transfer line is small, the cutting of the UV transfer film is placed in a fixed position on the production machine. (2) by rotating the wheel will transfer film and transfer lines to be straightened and covered on its surface to align. (3) adjust the transfer temperature, pressure, speed, through the heating pressure to transfer the transfer film on the pattern layer can be completely transferred to the surface of the line. (usually 160 - 180 DEG transfer temperature, pressure of 6 - kg/cm, the specific value based on the actual production needs.). (4) after the completion of the transfer process of cooling, cleaning, tearing off the surface of the film can be.